Tip:
Highlight text to annotate it
X
Hello and thank you for your interest in the Wine Box from AmmoBoxCreations.com.
When you've purchased your wine and you're ready to use the Wine Box,
you'll want to open it up
and remove the slide-latch from inside.
This will become useful soon,
but for now we're going to set it aside.
The next thing we'll do
is get our store bought wine,
and open up the box.
Inside the box, you'll find a bag
that contains all the wine.
Remove the bag, and you'll notice the spout.
The spout has some ridges here at the base that we'll use that to lock it in
place when it's time.
For purposes of demonstration, I'm going to remove the lid from the box so you
can see this a little more easily.
Next we'll take the bag of wine,
and put it in the box, and feed the spout through the hole in the bottom of the
Wine Box.
With the spout through the bottom of the ammo box, we'll then use the slide-latch,
with the felt side toward the inside of the ammo box,
to lock the spout in place.
Slide it over the ridge
that's holding it in place on the bottom, and you can see that it's locked firmly into
place now.
When transporting the Wine Box, you may want to protect your spout from damage.
In that case you simply lift up the latch from the inside,
poke the spout back into the hole,
and slide the latch down.
Now the spout is protected from any damage that might occur during transportation.
With the wine bag completely installed now, you can see there's plenty of room for ice packs to
go in here to serve pre-chilled wine while you're on the trail.
Lock the box closed,
and you're ready to enjoy your wine.
Thanks again for your interest in AmmoBoxCreations.com and I hope you
have a great day.