Tip:
Highlight text to annotate it
X
Today on our 2012 Toyota Yaris, we'll be test fitting the Yakima roof rack system
with the round bars, 48", part number Y00408; the Q8 Q clips for the Yakima Q Towers,
part number Y00608; the Q96 Q clips for Yakima Q Towers, part number Y00696; and the Yakima
Q Towers roof rack feet, part number Y00124. With our roof rack system assembled according
to the instructions, we'll begin by placing half of our roof rack system on the front
part of our vehicle. To ensure that we have this in the correct location, we need to measure
6" from the leading edge of the windshield to the closest point on our tower. We'll
do this for both the passenger and driver side to make sure that they are in line with
each other. Then we'll use the thumb screw to tighten the clamp and then close the lid,
which will tighten it even more, securing the front part of our carrier. We'll do
this for both the passenger and driver
side of
the vehicle.