Tip:
Highlight text to annotate it
X
so the idea of installing a golf grip with no tape and no solvent is quite
different from traditional methods so we wanted to
take some time and provide technical instructions that gives detailed
instructions on how to use our
injured
tables installation tools
to install a grip with no taper no solvent
so we set up a little makeshift
uh... workbench here at bell for golf club in boston's south carolina
at the teaching center and williams also groups and
tried it was treated use these tools for you
as clearly as we can
okay first things first
we need to have an air compressors that can generate
somewhere between sixty psi and a max of a hundred and twenty psi
once we have an air compressor we recommend getting some of these quick
connecting tools
that will allow you to
easily attach the air done
to their compressor
we recommend using eight fights or other device to secure the club that's
designed for golf clubs so that you don't
damage the shaft of your club
once the clothes secure your ready to start installing in removing golf trips
we recommend
cutting grips off of the shaft using the book played like this
this way oftentimes we can preserve the existing tape and blow a new grip on
over that tape without having to peel one retake
but pull on the hook blade
down the grip
now that it's cut
it kills off quite easily
and we haven't disturb the existing t
just like that
once you've gotten the old groups all
you really face of three options
you can see that this club with the existing tape isn't very good shape so
would be quite easy to below a new grip on over this case
the other option is you take the time to kill all the tape all
you can blow and a grip on directly to the chap
and if that's going to give you the size that you're looking for
you can you please read it
state like this
to build up the threat
the way you want
now that we've got the old-growth ball
we've got the tape situation that we want
and we've got the club's secured in the vice
the first thing to do is to actually start the grip onto the shaft with your
fingers
so spread it like that
but about the first quarter of an inch on the grip
now we've started the first half inch or so of grip onto the shaft need to attach
the air tool to the but the end of the grip
now we're ready to actually install the grip and it's at this point that
it's key to make sure you do somethings or don't do somethings uh... to make
this whole process work smoothly
first and foremost
when i first put the arrow on it
it's gonna wanna push back towards me so i need to keep a little bit of forward
pressure
with the gun itself
the second thing is it's best not to lay on the air and hold the air on
constantly
it's actually better too
installed a grip with quick one to two second burst of air
the third thing that you have to watch
is your natural tendency is to want to squeeze the club
what that will do what you cut off the air flow between the group in the shaft
make it impossible for you to push the group for the wrong
so all i'm going to do is use my left hand here
as a very light died
and i'm going to push forward with my right hand
very important to make sure that the grip stays level with the shaft
it's very easy cut off the air flow if i love the group too
by moving and up or down
once you've got the grid two words just a couple of inches from being in its
final place as you can see here the blood into the shaft is here
uh... we've got a couple inches to go so important to go ahead and give it a good
push to make sure that the but of the shack sees perfectly at the end of the
graph
now that we've got a grip fully onto the shaft
we can apply a little bit of hair
turn the grip to align it properly
pusher poll the group to stretch it
for thinner thicker field
she