Tip:
Highlight text to annotate it
X
Ok, we are at 180 C. It could happen at any moment. Drum roll, please.
Anticipation is killing me.
Oh, there we go, there we go. I see a little bubbling around the corners... Oh, and it is coming up the chip.
Oh, there we go, we see... Oh, the chip moves itself into place as the solder reflows.
Oh, there we go, it's pulling the other chips into place one by one. Everything is
moving itself into position.
Gradually spreading out as the board warms up. We're going to leave this for about 15...
15 seconds or so
to make sure that even the parts under the chips have been reflow properly.
But, as you see in this instant it suddenly goes from not flowing to
flowing. Pulling all the components into position.
[Most excellent.]
Yes, most excellent, indeed.
Let's see. This looks suitably done to me.
We are going to cut the power.