Tip:
Highlight text to annotate it
X
We hope you are enjoying your Fellowes AeraMax Air Purifier. This video will instruct you
on how to replace your true HEPA and carbon filters. First locate the filter panel on
the back of your AeraMax Air Purifier. To open the filter panel compress the tab on
the top then pull the filter panel towards you. If your air purifier is on you will notice
that it will automatically shut off as you pull out the filter panel. Remove and discard
any dirty filters, place the new clean filters into the air purifer. Be sure to insert the
true HEPA Filter with AeraSafe antimicrobial treatment first followed by the carbon filter.
You will notice that the arrows on your true HEPA Filter point towards the air purifier.
To close the panel fully insert the bottom tabs of your filter panel first and then push
the panel into the air purifier until a click is heard and your air purifier will automatically
turn back on and resume functioning. The next step is to reset the filter indicator light.
Make sure the filter panel is snapped into place and the air purifier is on, locate the
filter icons on the display panel. Next press and hold the filter icons for 3 to 5 seconds
until you hear a short beep, at this time the HEPA Filter icon will flash amber. Next
tap the filter icons to alternate between the HEPA and carbon indicator lights. Once
the desired filter is illuminated press and hold for 3 to 5 seconds until you hear a short
beep. The indicator light should turn off, repeat this process for each filter as needed.
Under normal usage Fellowes recommends that the true HEPA Filter be replaced every 12
months and the carbon filter be replaced every 3 months. Enjoy using your Fellowes AeraMax
Air Purifier. It's the maximum protection for the air your breath.