Tip:
Highlight text to annotate it
X
Today on this 2010 Chevy Aveo were going to do a test fit of part number a30901 from SportRack,
this is their 2 bike easy mounted hitch rack. One quick note, this bike rack will work with
1-1/4 hitches class one and class 2, and also will work with 2 receiver hitches with the
included bushing. Well start off by installing the bike rack into the hitch. We will tighten
down the anti rattle bolt and put the clip on the other end. We will use a wrench to
tighten it down. Next well give you some measurements to give you an idea of clearance between the
bicycle rack and the car, and the bicycle rack and the ground.
The closest point to the bumper is going to be 5 and it looks like the ground clearance
will be 11. Alright now well go ahead and fold the bike rack and give you one more measurement
at the very end. We pull out the two key pins, and fold it and the reinstall the pins in
the matching holes, and the measurement at the end will be 16 Alright now I can go ahead
and check for access to the back of the car. Okay looks like that clears the rack. Okay
next well go ahead and load up a bike, what we will do first is take the center post and
pull it out of the way, and then install our bike.