Tip:
Highlight text to annotate it
X
During this demonstration we are going to show you how to turn one of our Hulkamania
t-shirts into the sleeveless t that Hulk Hogan use to wear on his way into the ring. As a
disclaimer, once you cut your shirt we cannot take it back, so make sure you do it right
the first time. What you'll need is a good pair of fabric scissors. You can get these
at any craft or fabric store. I wouldn't recommend using regular scissors as they wont cut through
the fabric like you need to do for this project. Also, you will need a tape measure or ruler
so you can measure where you are making your cuts. You might also want to get an old t-shirt
to work with first before you cut your Hulkamania one. That way you get come practice in and
work out any problems ahead of time. So, that being said, we are going to now make our Hulkamania
shirt. The first step is to cut the sleeves off your shirt. Make sure you remove all the
seams so you're going to want to cut inside here. Do it the same for both sleeves. Don't
worry about being really neat and precise. The shirt is meant to look ragged and torn
so if you kinda make a little mistake it's not going to be a big deal. When you're cutting
the neckline, you'll want to cut pretty close to the where the word Hulkamania is. So you'll
want to make a nice scoop neckline and then cut off the back too taking the seam with
it so it has a nice raw edge. On the back, to find the center you're going to want to
fold it in half so you can figure out where the center of the shirt is so you can do your
cuts. So for the first you want to go down 2 inches from the neckline. You'll need to
make about a 2 inch cut. For the following slit you'll want to measure down 2 inches
from the slit you just made and you want to make this one a 3 inch cut. So there all going
to go outward like a triangle shape as they go down. You'll want to go down about 2 inches
below that and make this one a 4 inch cut. Following that you're going to want to make
another slit, it's going to be 2 and a half inches down. Make a 5 inch cut. The final
one we're going to measure down another 2 and a half inches and do a 6 inch slit. Once
you have all the slits made, your shirt is pretty much ready to go. If you want to give
them more of a ruff look just give a tug on them a little bit. It kind of stretches them
out and gives them a mis-shapen look, and that does it for your Hulkamania t-shirt it's
just about ready to wear for Halloween.