Tip:
Highlight text to annotate it
X
Hi everybody!
Where were we again...? Yeah, the green pump handle that doesn’t fit!
Making of pump handle for Backpacker 2289g caliber. 22 sold by crosman.
Returns to pdf.
Cleans the drawing of useless information.
Scale and printed.
Copy the pattern on scraps of plywood.
Cut with jigsaw.
Cut to get the pump shape.
Damn!
Let start again.
Copy the pattern on scraps of plywood.
Cut with jigsaw.
Cut to get the pump shape.
Use clamp to hold the guide straight.
Cut again.
Remove the excess wood.
This is better.
Put the guide back.
Cut again.
Almost done.
It's done and straight.
Mark the emplacement of the pump lever.
Drill the wood out with a flat bit.
Get the groove clean.
Remove the two spring pins. A nail of the correct size does the job.
Try the handle on the gun and glue parts together.
Once dry, try the handle again.
Mark the spring pins holes.
Level and drill.
Look for alignment.
Remove excess wood.
Sand the edge.
We’re getting somewhere.
Trace the profile
Cut the profile
Plane the edge.
Bottom.
Above.
Round the edge with sandpaper.
Trace the curves.
Drawing curves.
Shape with sand paper.
It is easy isn’t it?
Finishing sanding.
Top view.
Bottom view.
Side view.
Finish preview.
The only thing left is to give the wood a finishing coat.
Making of pump handle for Backpacker 2289g, caliber.22 Manufactured by Crosman
Realize by MA14 Targets
Music by MA14 Targets on Korg DS-10 Synthesizer - Close Caption by MA14 Targets in SRT with Notepad - October 2012