Tip:
Highlight text to annotate it
X
Hi, I'm Mike and I'm here to tell you how to use AnyLink with your JR or Spectrum brand
radio. AnyLink includes a JR Spectrum compatible cord which you install on the left side of
AnyLink. And then once annually secured to the rear of the transmitter, you need insert
the headphones-style jack into the DSC trainer port. This power of the radio and notice that
the power switch remains in the off position when using AnyLink. The next cable which needs
to be installed is to the charge port on the side of the radio. Now AnyLink is ready to
transmit to any aircraft which has a Tactic receiver. To use any AnyLink with transmitter
ready aircraft, you must change the mapping. And how you do this is you remove the power
jack and you hold the left stick over to the left side and you reinsert the power jack.
Then you hold and AnyLink beeps three times showing that it's changing mapping. Once you
release the stick, it beeps twice indicating that it's ready for use with transmitter ready
aircraft. Thank you and if you have any questions please go to tacticrc.com or tx-ready.com.