Tip:
Highlight text to annotate it
X
Today on our 2011 Toyota Corolla, well be installing the Curt Class 1 Hitch part number
11266. Here are a few measurements to help you with selecting accessories. From From
the center of the hitch pinhole to the outermost edge of the bumper is 6 inches. From the top
of the receiver tube to the ground is 11 inches. Now well go ahead with our installation. To
begin, well locate our attachment points. On the 2011 Corolla, youll notice that the
vehicle has two tow hooks located on the frame. Well need to remove those tow hooks as those
will be the location for the mounting point of our hitch. Well start by removing the driver
side tow hooks which will expose the weld nuts that will be our attachment point on
our hitch. Now on the passenger side, well repeat the same procedure. Now with our four
attachment points exposed, were ready to go ahead and mount
our hitch.