Tip:
Highlight text to annotate it
X
Clean the windshield with dry fabric where the holder will be positioned. Attach the
bracket to the windshield making sure that the location of the bracket is not in the
drivers line of sight. Make sure the bracket is attached firmly to the windscreen.
Slot the Snooper DVR-1 in to the windscreen mounting bracket. Please note that you must
have the micro SD card in the DVR recorder for it to work.
Either slot the cigar lighter power lead or the hardwire power lead in to the side of
the DVR recorder, you can then use the cable holders to hold the cable so that it does
not obstruct the drivers view, we will not be doing this for the purposes of this video.
If the product has not been turned on for a long time, for example 3 days or if the
vehicle is in motion it may take longer for the device to establish GPS connection. The
GPS reception can also be interputed by an athermic windshield coating, heavily tinted
glass of by electric currents caused by other devices installed in to the vehicle.
The LED displays the recording status. When the light is solid blue the device is ready
for continuous recording, this is approximately 5-10 seconds after turning on the power