Tip:
Highlight text to annotate it
X
Before you start, insert new AA batteries into the side of the device as shown.
You will also need to insert a compact flash memory card to record your audio onto.
Connect your microphone using an XLR cable as shown.
Also connect headphones in order to monitor your recording.
To turn the Flashman on, press and hold the ON button.
To record, press REC for record pause mode and again to start recording.
You should then check your levels using headphones and the level meter.
If you need to adjust level, use the dial to the left of the record button as shown.
To stop recording, press the STOP button.
To listen to your recording, press the PLAY button once.
To select a different track, use the dial on the left and then press play.
To turn the Flashman off, press and hold the ON MENU button.
First, remove your memory card from the Flashman.
Do this by pulling down on the memory card cover as shown.
Then plug a memory card reader into the USB port of your computer.
Then insert the Compact Flash Memory card into the reader as shown.
A dialogue box should then appear on your screen.
To transfer your files onto the computer, select the OPEN FOLDER TO VIEW FILES option and click OK
A list of the files should then appear on the screen
Select the files you want to transfer by highlighting them.
Next go to the EDIT menu and select COPY.
Now select and open the folder that you wish to save your files to.
Then go to EDIT and select PASTE. Your clips will appear in your folder.