Tip:
Highlight text to annotate it
X
Hi
In this video I'm showing you my first RF project
I'm using 2 RF Modules
They cost me 22€ (expensive in Portugal!)
I'm using the Arduino to send data to the encoder through Serial
the data is sent to the Transmitter
received by the receiver
and decoded by the decoder
to light the 4 LEDs.
These wires are just the power! (no cheating :D )
I'll run a script that I programmed in Python
The script is reading data from my Joystick
printing it in the console and sending it to the Arduino
trough Serial
I'll try to demonstrate it simultaneously...
As you can see, as I move the joystick
the console is updated with the new values
Those values are sent to the Arduino
transformed into digital data to light the LEDs
With this, I can light each LED by moving the joystick
to each position (up, down, left, right)
I also programmed it to be compatible with multiple directions
However, I'm having trouble
when my joystick is in its center position
all the LEDs light up...
By the way, this is just my first project...
Thanks for watching! ;)