Tip:
Highlight text to annotate it
X
On behalf of expertvillage.com my name is Carolyn Travisano and I'm here to show you
about window murals. So I'm going to start mixing up the second color in the logo and
it's just a slightly lighter than the early color that we've just mixed up, which is this
one there. So we're going to use some old color that I have and add a little bit of
red to that and a little bit of brown. That's actually very close to the color that we're
going to use. So we have the two shades and now we're just going to add, I think we're
going to put a gold sun in the center of it rather than using their actual yellow that
they have in the logo just so if the sun reflects off of the gold aerodescent and it has a brighter
lighter effect. I'm just using acrylic paint right now so we can just use water to clean
the brushes and I just have one off to the side so I can stick my brushes in. It's very
important that you don't leave your brushes in because what will happen is what I did
is come apart. It eats the glue off of it, so it's very important you just stick them
in there, wipe them off and then leave them over in another bucket to dry. I'm getting
ready to lay down the paint on the logo. It's very important that you pick out your brushes
at this point, the one's that you will find the best detail with or to accomplish the
best detail with. So I have a few brushes that are my favorite and we're going to head
on over and lay down the paint then.