Tip:
Highlight text to annotate it
X
Welcome To G-TV! Today I will be showing you the Carlo Gavazzi SPD Series Switching Power
Supplies. The SPD series are din rail mountable power supplies, available in single phase,
two phase or three phase. The output power ranges from 5 to 480 watts in the single phase
models and up to 960 watts in the three phase models. On all SPD models with wattage outputs
from 90 to 960 Watts, a power factor correction function comes standard. On the front panel
are adjustable outputs through trimmer pot which serves to fine tune the output voltage
within a span of approximately, plus or minus 10% of the rated voltage. On the models from
100 watts and up, there is also a sliding switch which has to be used in order to select
the single or parallel operation. Most models have two LEDs, one green and one red, which
indicate the operational status. The green one indicates the output is OK the second
one is lit when the output voltage is out of the specified range. On all models up to
60 watts, a choice between spring loaded terminals and screw terminals is provided. All power
supplies, from 30 watts and above, have more than one terminal for the connection of the
positive and the negative outputs. This feature allows use of smaller conductors for the wiring
and simplified parallel connection. These power supplies have a high efficiency up to
%89. Carlo Gavazzi SPD Series Switching Power Supplies along with thousands of other products
and services are available at Galco.com.