Tip:
Highlight text to annotate it
X
today we are going to show you how to make the triple single headband with rainbow loom,
you will need two looms connected together, rubber bands, a hook and c clips. we will
now place the rubber bands on the loom make sure that
the arrows face away from you. we will place the perimeter bands, start from the centre
and go to the left. then place rubber bands right down the end in a
straight line.make sure your rubber bands go over the top of the last rubber band. repeat
this on the other side remember for both sides to finish by placing the last rubber band
to the centre pin. this is what it should look like. time to place the centre rubber
bands. place your first band on the centre pin to the pin infront of it and continue
placing bands to the end in a straight line. place triangles down your loom starting from the second pin
with the point facing towards the red arrow. do this to the end. back sure you leave two
pegs at the end. we will now be looping
the rubber
bands you will
need
your hook.