Tip:
Highlight text to annotate it
X
Today we are going to show you Ericsons Cargo Control Cargo bar with ratchet system, part
number 08908. Today we have a 2012 Silverado with an 8 foot bed, and were going to show
you how to install and use the control bar. The bar is a universal fit item. It will work
with all vans, trucks, mini vans and sport utility vehicles. It can be adjusted from
40 in length to 70 in length without using any tools. The cushion, no slip, rubber pads
on end not only keep the cargo bar in place, but it also protects the vehicles surface.
Now we will go ahead and hop in the bed of the truck and show you how it works. We have
a cooler in the bed of our pickup truck, and we are going to set it all the way up at the
front of the bed. To prevent it from sliding around in the truck while we drive we are
going to install the Ericson Cargo Bar. First we will take one end of the bar and place
it against the drivers side of our bed, and then we will extend it to the passengers side.
We will then use the ratchet system to put enough tension on it to hold it in place.