Tip:
Highlight text to annotate it
X
Today on this 2012 Toyota 4Runner were going to install part number C31054 from Curt. This
is what the hitch looks like when its installed on the vehicle. Next well give you some measurements
that will help you out in selecting some accessories such as a winch mount or a skid plate. From
the center of the hitch pins the outside edge of the bumper is going to be 4 inches and
from the top of the receiver opening down to the ground will be 11-1/4 inches. Now well
go ahead and show you how t he hitch is installed. The first thing we need to do to start our
installation is to go ahead and remove the driver and passengers side underbody panels.
Therell be five fasteners on each side. Thats it for our drivers side. Repeat the same process
on the passengers side. Next, we need to remove this bolt right here. Therere
three of them in a row, we take out the bottom one.