Tip:
Highlight text to annotate it
X
edge sanding
Dremel offers a wide variety of attachments and accessories to help you
undertake just about any sanding project
in this demonstration we'll be using the Dremel 4000 tool, the sanding and
Grinding Guide Model A576 and a quarter in sending band number four oh
seven
whether you're looking for any even 90 degree edge or consistent
45 degree babble
the sanding and grinding guide is a great attachment for insuring a
consistently and smoothly sanded edge
this project can also be completed using any Dremel variable or two speed rotary
tool that works with all attachments
when using the sending in ground guide
always secure either your workpiece or the tool and guide
the Dremel Multi-Vise is great for this
when cleaning up an edge that is perpendicular to the surface of your
workpiece
keep the top of the guide flush against the workpiece a surface
keep your movements slow and steady while going over your peace
repeat the process until you're satisfied with the edges smoothness
the sanding and grinding guide can be used for both falt and beveled edges
for a 45 degree bevel
rest the face of the sanding grinding guide stamped with the Dremel logo on
the surface of your workpiece
here's some additional thoughts on edge sanding
sanding bands are available in quarter-inch and half-inch sizes and are available in
three grits 60, 120, and 240
the platforms orientation to the tool can be flipped
the guide can also be adjusted from zero to three quarters of an inch
depending on your desired depth