Tip:
Highlight text to annotate it
X
We are going to install
the fiber connector for a Leopard cable
Anyway
There are two kinds of fiber
The diameter of the first fiber is about 4mm
The diameter of the second fiber
for the CV0 cable
is about 3mm
we must know the diameter of the cable because
every cable has a different installation method
We are going to need the following materials
the connector cover
the ferrule,
this part will make the connection
the nut
this part fix the connector to the fiber cover
the tube is the part that crimps the
kevlar wires and the ferule
and the final protection that
we will install when the connector is finished.
Now, we are going to know the needed tools
the stripping tool for the buffer covering,
this tool has two guides
the first guide is for a 900 microns buffer
and the second is for a 500 microns buffer
, A cable stripping tool to release the jacket and avoid
the cut of the fiber when we strip the jacket.
The crimping tool.
And the most important tool...
the diamond blade cutter which finish the connector.
And that is all we need
to make a good connector
See other videos to know more.