Tip:
Highlight text to annotate it
X
Hi, my name is Tony Ramirez and on behalf of Expert Village this is how to program a
universal remote control. Enjoy. Chapter 7-Programming your Universal Remote for a Cable or Satellite
box. In this lesson we'll begin programming a basic multi-device numerical programmed
universal remote such as this one here. Turn on your device, find the codes provided in
your user manual or on the product's web site before moving on. Press the device button
you wish to set up, in this case TV. Once the information is obtained press and hold
the set-up button until the LED blinks twice, then release set-up. Enter the number you
have found earlier, if performed correctly the LED will blink twice. If the LED did not
blink twice then repeat the previous steps and try entering the same code again. In the
remote at the device and press power, the device should turn off. If it does not respond
repeat the previous steps using a different code.