Tip:
Highlight text to annotate it
X
EN11 - How To Sublimate Polyester Apparel/Clothing In A Standard Flat Heat Press – The Foam Process.
Before you start you will need all of these items.
Create your image at 300dpi in RGB mode.
Size it to fit the garment.
Print in reverse (mirrored) using Sawgrass inks and sublimation paper.
Preheat press to 380-390°F / 193-199°C.
Set the time for 35-45 seconds.
Set the pressure to very light (10 psi).
Place a sheet of paper on the heat press to keep it clean.
Place the sheet of high temperature foam on the press.
Place the garment onto the foam pad and smooth out wrinkles.
Use a lint brush or roller to remove any dust.
Cover with a clean Teflon sheet.
Lightly press the garment for 5 seconds to remove any moisture.
Lightly spray the transfer with removable adhesive to stop it moving.
Place the print onto the garment with image facing down.
Cover with a Teflon sheet to protect the heat press.
When the time is finished open the press and quickly remove the transfer.
Beware the garment will be very hot!
For a step-by-step guide please visit sawgrassinks.com