Tip:
Highlight text to annotate it
X
How to Adjust An Adjust-To-Fit™ Toolbelt.
I am going to show you how to resize the belt length
of the Occidental Leather Adjust-To-Fit™ Series.
To lengthen or shorten assembly;
Pull the two inch nylon webbing from behind the suspender loop and the keeper strap.
Unthread the two inch wedding from the metal Oxy Lock.
Once...
...then again...
...so it can be adjusted freely.
After determining
the belt length required.
Make the adjustments.
You are aiming for a size that places the roller buckle pin
at the mid point
on the leather tongue.
The tool belt is designed so,
when you put it on, the buckle will be off to the side and out of your way.
The ideal adjustment places the bags on, or just back, of the hip centerline.
Once you're done resizing your Adjust-To-Fit™,
rethread your 2 inch nylon strap through the Oxy Lock.
Make sure to take out the slack.
Loop it over the lock and go through the other side
Once you have run,
your strap to the other side of the buckle.
Continue the strap underneath the keeper strap.
Do whatever adjusting and straightening that is needed.
Then, under the suspender attachment loop...
Then, take whats remaining and hide it behind,
the tool and hammer holder.
Now get to work!