Tip:
Highlight text to annotate it
X
Our laboratory water purification systems have been designed
with users in mind. In this brief video we'll show you how easy it is to change
cartridges in our Select HP model.
When the cartridge needs to be changed
a poor water quality warning will appear on the screen.
Turn off the water supply
and check you have the correct cartridge ready to install.
Before you proceed, you should ensure that the green transit caps at
the back of the cartridge unit are removed.
The front panel is easily removed exposing the cartridges
and the cartridges simply slide out after pressing the release lever located
just above them.
Align the new cartridges up with the support rails and push it in
until it clicks.
The screen will prompt you to confirm the new cartridge.
If cartridge has not been housed correctly
you will not be able to reset the unit, and an alarm will sound.
If this occurs, ensure that you have followed the previous steps correctly.
You can now turn on the water supply
checking there are no leaks before replacing the front of the unit.
The display will clearly show that all systems are running
and the unit is now ready to operate
just press dispense.
To learn more about Purite products, please visit our website at www.purite.com
To learn more about Purite products, please visit our website at www.purite.com