Tip:
Highlight text to annotate it
X
Today, on our 2013 Ford Edge well be test fitting the Curt Tri-Ball Mount part number
c45001. To begin our test fit we need to go ahead and get our hitch height. This is from
the ground to the inside top edge of our receiver tube. We have a hitch height of 13 1/2 inches.Now,
we can go ahead and slide the shank of our ball mount into the opening of the receiver
hitch tube. We can then go ahead and align the pin hole and then secure it with our pin
and clip. We can then turn the tri-ball mount to either the left of the right side to access
the 2 inch ball or the 1 7/8 inch ball.