Tip:
Highlight text to annotate it
X
Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Vertex 4 Bike
Carrier, part number TH9029. Now to begin our test fit, well slide the shank of the
carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt
through the pinhole and tighten with a wrench. Now well go ahead and go over a few clearance
measurements to see how the bike carrier and this vehicle will fit together. There is about
ten inches of ground clearance. The closest part of the vehicle to the closest part of
the carrier is about two inches. With the cradle arms folded down, weve added about
11 inches to the overall length of the vehicle. Now well go ahead and lift the grey lever
at the top of the carrier to swing the cradle arms out and well get a measurement of 34
inches added to the overall length of the vehicle. To load the bike, well make sure
that the mast is in its upright position. Well undo the straps, set the bike into the
frame cradles and secure it with the straps. That completes todays test fit for the Thule
Vertex 4 Bike Carrier, part number TH9029 on our 2013 Chrysler Town and Country. .