Tip:
Highlight text to annotate it
X
Alright Paw paw Lets see now. Its about where it was before I disconnected the vacuum pump.
Make sure the red hose is off. Open up the freon can and crack open the valve never exceeding
10 PSI. You want to add in the freon very SLOWLY. lets plug her in and blow er up Alright.
See it in negative? If that is a lawn mower in the background it sucks. Leave the can
up for vapor. I feel the can getting cold. It is frosting up as gas goes in. I am turning
this release vlave very tiny amount going in. if you choke it down it is as bad as if they
ain't any in it. The compressor is pulling. We want it to be between 0 and 5 PSI and while
charging we don't want to exceed 10 PSI so the valves won't
get damaged inside the compressor. We are shooting for 5PSI. This is the safe way to do it. You don't want to overfill or flood the system. Get it to stay
between 0 and 5 PSI then tweak it as needed but if you go above 5 PSI you stand the chance
of overcharging the system. I like to get it to 5 PSI. If it will sit at 5 and stay
at 5 it is done. You iz done. Maybe we can get it charged before that raggity asz lawnmower
comes back in the field behind the house. Thats it lady and germans. My job is to fix
em not clean em. let somebody else do that. I have 2 ice trays I will check tomorrow and
see if I has ice!