Tip:
Highlight text to annotate it
X
I just put a marquetry ago.
An opening in the book cover...
should look as if...
was pierced by the inner paper...
and scraps of paper to bend outward.
This picture is me as a template.
The picture I have transferred to transparent paper, with minor changes.
This is even without shadows
I transferred the image with carbonless paper to the back.
Now I cut out the parts and insert them into the base veneer.
I make the cut from the back of the veneer. 12 00:02:40,00 --> 00:02:50,00 Good tools with sharp blades is important.
Now I have to cut a suitable piece.
This is not large enough.
I have to cut a new piece.
Next to me is the hot sand.
I show you how I do it. It's fast.
I am now in the area of ??the image where there is little shade to be seen.
I need a larger area bright veneer.
Now I push the piece until it fits into the picture.
Secured so that nothing slips out.
I cut the neck from behind. This piece I cut from the front.
Why am I doing this so I will show later in a sketch.
Now fix from behind.
All tapes are removed after completion. Then holds the veneer tape.
Now I carve the outline of the front one.
The outer contours have to be very accurate. To the inner outline is later attached veneer.