Tip:
Highlight text to annotate it
X
Insert the plastic tray
Lift the cover and remove the tank.
Fill the tank with water and place it back, making sure that both hoses are inserted.
Turn the machine on and wait for the light to go off.
When using the machine for the first time, it has to be primed (remove the air from the system):
press the lever down until it locks into “closed” position, then press the coffee button until hot water is flowing.
This step needs to be repeated every time the machines runs out of water.
Place the pad in the presser and press the lever until it locks into “closed” position
Place the cup underneath and press the coffee button.
When the desired coffee quantity has flowed into the cup, turn the coffee button off.
After brewing, remove the pad from the device and turn the machine off.
WORINGS
If, when the coffee button is pushed, the machines makes a noise without any water flowing, try priming it
If you forgot a pad in the device and it stuck to it, do not try to forcefully remove it.
Simply turn the coffee button on – the hot water will moisten the pad and it will come off by itself.
If the machine is leaking water, make sure both hoses are connected to the water tank.
If the lever cannot be easily pressed into “closed” position
adjust the upper part of the presser by slowly rotating it.
Do not touch the presser while in use. It is very hot.
The machine does not offer coffee if the lever is not in the “close” position
If the machine is not in use for a long period of time, we recommend turning it off.