Tip:
Highlight text to annotate it
X
Today on our 2011 Jeep Grand Cherokee were gonna install the Draw-Tite Hitch part number
75699. Here are a couple of measurements that will assist you in selecting accessories for
your new hitch such as a draw bar, a bike rack or a cargo carrier. From the center of
the hitch pinhole to the outermost edge of the bumper 3 inches, from the top of the receiver
tube to the ground is 15 inches. Now lets go ahead with the installation. For this hitch
installation, well actually be reusing the manufacturers hardware thats already mounted
in the frame. We have two mounting locations on each side.
Here are the two from the driver side. Well remove these two fasteners on each side, put
our hitch up into position and reuse the same fasteners to secure the hitch. Nows a good
opportunity to get a second set of hands to help you hold the hitch up in place while
you install your fasteners. Well install each fasteners finger tight til we have them all
in place. With all of our four fasteners in place, lets go ahead and tighten them down.