Tip:
Highlight text to annotate it
X
Hi, it’s Steve from PartSelect. Today we’re going to show you how to change the snack
drawer on your refrigerator. It’s a really easy job; no tools are required. Let me show
you how we do it.
Now to do this repair we start by opening the refrigerator door and pull the bin out;
make sure it’s empty. Pull it until it reaches its stop then lift up on it, slide it the
rest of the way out of the shelf and then we’re going to put it on a suitable work
surface so that we can change that front escutcheon on it.
Now to remove the front escutcheon or trim we simply get a hold of the backside of it
inside the drawer and just lift up on it and roll it right off the front. Discard the old
drawer.
Now we’ll make sure that this is clean before we reinstall it, hook the front edge under,
center it up, and simply roll the edge out over until it snaps in place; and now we’re
ready to reinstall it.
Now to reinstall the drawer simply line up the side rails, put it into place, lift it
up past the stops and our repair is complete.
Told you it was an easy job. Thanks for watching and good luck with your repair.