Tip:
Highlight text to annotate it
X
Today on this 2012 Chevrolet Express Van were going to install part number 118392 from Tow
Ready. First thing we need to do is go ahead and get access to the back of the van and
to the wire harness. Now this is a cargo van so the wire harness is out in the open. Well
start on our driver side and disconnect the wire harness and install the T connector for
that side. Then well route the T connector with the green wire over to the passenger
side and repeat the same process. Well split the connector in half and install the T connector.
Itll take some time to take some zip ties and zip tie the green wire to the factory
harness. After we zip tie our wires well go ahead and take a moment to take the white
wire the ring terminal and attach that to the factory ground screw. With that our wire
harness is already installed. Now to use this wire harness all you got to do is bring it
to the outside and you can shut the door on it. The door seal is soft enough where it
wont damage the wire.