Tip:
Highlight text to annotate it
X
Today on our 2006 Chrysler 300, well be installing the Curt Hitch, part number 13465. This is
what our hitch will look like once it's installed. Next, well give you a couple of measurements
to assist you with selecting accessories for your new hitch. In the center of the hitch
pinhole to the outermost edge of the bumper, is seven inches. From the top of the receiver
tube, to the ground is 10 inches. This will assist you with selecting accessories, such
a drawbar, a bike rack or cargo carrier. Now, lets go ahead with the installation.
First, before we can install our hitch, well need to do a little preparation work by lowering
the exhaust. To do this well first put a safety strap underneath the exhaust so it can't fall
any further then we need it to in order to install the hitch. Next, well go ahead and
take some spray lubricant and spray down each one of the exhaust hangers that well be removing.
Weve got one just above the tailpipe
on
both sides.