Tip:
Highlight text to annotate it
X
The Kempes Chair. With adjustable head and arm rests Kempes' design and function put
you in the perfect position to concentrate on the task at hand. Its refreshingly modern
design fits perfectly in any professional or home office environment. Whilst its mesh
construction ensures comfort and breathability. Your chair will arrive with all the fittings
and tools you need to assemble it quickly and easily. To being, simply place all 5 castors
into the chair's base as shown. Turn the base over and place the gas lift into the centre
hole. To aid the next few steps use the box that your chair arrived in and place the seat
on top of it. Fit the arm rests, starting with the left arm marked "L". Tighten all
bolts fully and then fit the right arm. The back simply slots into the mechanism as shown.
Secure the back tightly using the three bolts provided. Once complete simply insert the
assembled base and gas lift into the hole under the chair before turning the chair upright.
To attach the mesh head-rest line up the hole with the back of the chair and fasten tightly
using the 2 bolts provided. For a neat finish apply the provided sticker over the bolts.
You now have your complete and fully assembled chair. To adjust the head rest simply lift
to change its height and push to adjust its tilt. The back of the chair can be easily
lifted to adjust its height. To raise or lower the arm rests just press the silver button
whilst lifting or pushing. The lever below the seat allows you to control both height
and tilt. Simply push the lever down to adjust height and pull it out to adjust tilt. This
can be left pulled out for a free tilt or pushed in at any point to fix the back to
the required angle. To increase the tilt resistance simply turn the adjustment *** below the
seat clockwise. The Kempes Chair, modern, stylish, reliable.