Tip:
Highlight text to annotate it
X
Today on our 2004 Ford F250, we'll be installing the Hopkins Smart Hitch Backup
Camera, part number, HM50002. To begin our install, we'll first go ahead and mount
the license plate bracket with camera and backup sensor. Note, as we put the bracket
in position, we'll feed the wiring pigtail that comes from the bracket, between the hitch
and rear tailgate. This will feed it underneath the vehicle. We'll use the new hardware
provided to secure the bracket to the bumper. Now with the bracket secured we'll move
underneath the vehicle, we'll take the new wiring harness and plug into the manufacturers 7-pole. To plug into the 7-pole connector we'll press on the
connector
lock
and
remove
it
from the 7-pole connector.