Tip:
Highlight text to annotate it
X
[Music]
We are here to show you how to use HD Dress
HD Dress is a non-greasy water-based exterior protectant
for the trim of your vehicle tires engines
plastics. It's very easy to use very easy to apply
just take a sponge, Whether it's microfiber
terry cloth, cotton
apply it liberally to your pad put it on to your
plastics. Now for more of a shine
leave it on longer come back to wipe it out later so if you want to leave
more or a wet gloss
do the whole vehicle then come back to wipe it down
if you want more of a matte finish you want to wipe it up quickly
this gives you a clean
matte finish. HD dress is a water-based non slinging adjustable finish
which is perfect for tires cuz some of us like to have it shiny
some of us like to have it dull where it just looks nice and fresh and clean
but you also always want to have something to protect your tire
just surface starts to crack and starts to look old after a while
being out in the Sun and battling all the elements so with HD dress
to put on a tires
very simple you take a brush get the brush
covered with the material HD dress you can put it on nice and even
and brush makes it ideal for these treaded surfaces
now if you want it shiny don't worry about
taking it off just leave it
if you want more of a matte finish
take to wipe it down so you can have either a matte finish or shiny finish
it's great and ideal for your wheel wells just take spray this material
into the wheel wells. It's non-sticky
so as you're driving it's not collecting any of the dust or road grum
it's going to protect it and keep this plastic that's in here nice and protected
you can put HD Dress on the engine very simply
just cover the engine actually this will penetrate into the rubbers into the
plastics. breath life into it.
out another way that you can use this product is also with the blaster
what we've done is just distributed all the HD dress
through the engine make sure that it gets in the nooks and crannys
then you can wipe it down
be careful with any of the sharp metal objects in the engine area
the wiring. any of that
you don't want to pull it. then you can take any of the excess
to dress the front
and any of the plastic that you need to.
engine is fully dressed it's clean and taken care of
very easy low maintenance