Tip:
Highlight text to annotate it
X
Hello there and welcome back to http://www.aquaheat.org.uk . This is just a little video about Magnaclean.
We fit Magnaclean on various systems, they are generally better on a bigger old house
– large house system (don’t know why I said old house!) where you know, you’ve
have lots of existing old pipework and we’re modernising the system and putting a new boiler,
a condensing boiler on. To protect the boiler and protect the system, even though we’ve
flushed the system, we put inhibitors in the system which stops sludge from building up.
You still get some residues of sludge and swarf and stuff within the pipework and overtime
this can damage your boiler. So this particular device is a Magnaclean, which is the brand
name ( you get other makers of this) you’ve got the central heating water that flows through
here and then any kind of like little metal swarfs that are within the water, stick to
breaded magnet inside there. And it flows back out, through your coil. This can be installed
in various places on the job. When we do our service on the boiler, where we generally
will come round and we’ll shut this off, peer in here and then we take this out and
a big magnet will be full of slimy water and we just clean that off somewhere, safely into
a drain and then we just refit this again and retest the system. Then you are good to
go again. It stops and breaks down the fact that sludge and metal can damage things like
your new pump, boiler and can inhibit the performance of your valves, your electronic
valves and that kind of thing. So a good piece of kit to work alongside a flushed system.
So if you want information on this about us maybe fitting one for you, then drop us an
email to info@aquaheat.org.uk . Thanks very much.