Tip:
Highlight text to annotate it
X
Hi, this is Melissa Dacher here with model Susie Chhuor for Expert Village. Today we
are going to show you how to apply vampire make-up for Halloween. Next we are going to
show you how to apply vampire fangs to finish off your look. Usually with these includes
impression putty as well as the fangs themselves. The putty will make it so that way you can
get a nice tooth impression for when you stick it in your teeth. Then it will stay. So first
what you do obviously read the instructions for any packet that you get. And with this
one it specifically says to remove all of the putty from both bags. Comes with a base
and a cap. I am going to remove the base first. Then you want to try to do this as quickly
as you can before it hardens. So you have a base and a catalyst. A catalyst is going
to cause a reaction in the paste. The white is our catalyst. What you are going to do
is get as much as you can possible out of both fangs. I am just going to rub it together.
Mix it together with your fingers like so. That is pretty good. You are going to take
it between your fingers and roll it into a worm like shape. Kind of like you are rolling
dough out. You are going to take the putty, take your fangs you are going to place some
putty in it. Just kind of pack it down. Probably half of what you have. You want to do it until
you have enough putty so it seeps out through the hole very slightly as you can tell right
now. That one is done. You take your tooth you center it on whatever tooth you decide
to and you push it up until it sticks. And with the excess putty that came out from the
back you are going to take your tongue and roll up against it and smooth it out. Do the
same for the other side. Find your tooth, center it and push. Now some access putty
will come out. You can either remove it or you can leave it to have that nice green effect.