Tip:
Highlight text to annotate it
X
Today on our 2012 Toyota 4Runner, were going to be test fitting the Swagman Titan 4 Hitch
Mounted Bike Carrier, part number S63410. To mount the carrier to the hitch of our vehicle,
well insert the shank into the receiver tube. Well line up the hitch pinholes and feed our
anti-rattle bolt inside. Well use a wrench to tighten it down. Well go ahead and give
you some clearance measurements. From the furthest point of the bumper to the closest
point of the bike rack measures 11 inches. We also have about 19-1/2 inches of ground
clearance from the bottom of the carrier to the ground. Next, well check for rear vehicle
access. Well pull the release lever at the bottom of the bike rack and tilt it down.
Well open the hatch of our 4Runner to make sure we can still access our cargo area. With
that done, we can tilt our bike rack back up and begin
loading our bicycle.