Tip:
Highlight text to annotate it
X
Hi everyone! Iin this video I will make Trapper's mask of from 'Dead by daylight'.
The head of a dummy I will plaster with plasticine, after that I shaped it like Trapper's mask.
According to the pattern of the mask, I marked out eye sockets, nose and mouth.
I took the knives for tree and removed the excess clay from the mask.
The plasticine model will be plastered with newspaper and album leaves.
In order the mask won't stuck to the clay, I put a thin tape on the plasticine model.
I will glue with PVA adhesive.
I glued paper petals with the brush.
In total I got 15 layers.
The mask was easily removed after the drying.
I strengthened the mask with paper sheets from the inside.
In order the mask won't be stratified on the edges I glued paper sheets to it.
I plastered a mask with putty for wood.
Using knife for the wood I cut holes for the mouth and eye sockets, I also will cut the cracks on the mask with it.
The abutment for the back of the head I made from PVC plastic.
I made teeth from PVC plastic and glued them with a hot glue.
I sanded the whole mask with large sandpaper.
I primed the mask.
I marked all the scratches with black paint.
I coated the mask with mat lacquer.
I glued a net on the mouth.
glued a foam-rubber.
Thanks everyone for your attention, check this video, see you!