Tip:
Highlight text to annotate it
X
Hello guys this is a video about making a papercraft creeper
This was suggested by "TheSpaceArena" in my old crafting video
First of all you need to print it. Check my old printing video.
And after printing it you should cut the creeper itself
Then you shouldn't throw away the excess 'cause we're gonna use it.
So what you do is to cut the creeper into sections
Sections like the legs
After cutting the sections of the body
Perhaps the head, the body, and the 4 legs
Refine the cuts more, I'll start with the head.
At times like these when refining the edges of the minecraft creeper
You should use the cutter or exacto knife in order to refine it more
But if you do it, make sure that you get the excess of the board then place it under the head
So you won't damage the table you are using
After you have finished refining the shape with the cutter.
Do it on other parts as well
Like the torso and the 4 legs
After you are done refining and cutting the parts
Move away your cutter and scissors
Then grab the head 'cause this is the first thing I am going to start with
Then what you need to do is to fold the edges first
'Cause you know it will make the building easier
After folding the edges proceed with the tabs
After you are done folding the edges (and tabs), do it on the other parts as well.
After you are done folding the shape and the tabs
What you're gonna do is to shape this thing like a cube
Make sure that the tabs are inside
After that, use your glue
and remember to always start with the inside to the out
After you are done gluing the tabs
You will have something like this
Do it also on the torso and legs
After you are finished with the torso it will look like this.
The legs of the creeper look like this
and also do the other 3 and after we do that.
I'm going to assemble it and show it how to do it.
here comes the fun part where we put it all together
So first of all we you put the head on top of the torso
Like this, then just glue.
Like that
Then the next part, the feet.
The feet are quite hard
So what you need to do is to
put glue on the edge, the diagonal edge
Which is this one the diagonal edge here.
Put glue on that
Then stick it diagonal to the torso of the creeper like this.
After you have done it
It should look like this.
Then do it on the rest of the feet.
After you have finished doing the legs on the torso
It should look like something like this
And if you have glued the 4 legs it should look something like this.
Yes, our creeper is now done
And our old creeper from last year has a friend
Except he is a younger so he's smaller
Thank you for watching
Please like the video, If you like it very much. Favorite it. If you want to support me, Subcribe.
Goodbye!~