Tip:
Highlight text to annotate it
X
Today we’re going to be installing the UnderCover Se Tonneau cover on a Dodge Ram 1500.
First, install the rear mounting brackets by placing a 5/16” x 1 1/4” bolt with a 5/16” lock washer and a 5/16” washer through the hole in the bracket.
Place clamp on backside of bracket behind the bed lip of the truck.
Be careful to not let the clamp twist while tightening.
Mounting bracket bolts must be tightened down without bending the bracket.
Be sure to keep the clamps straight and do not let them turn while tightening.
Then, add the hydraulic strut to the ball stud on the rear mounting bracket.
Do this for both sides.
Next, using a tape measure place the rear end of the front bracket 16 inches from the inside wall of the bulkhead.
Now using the clamps provided place 5/16 inch by 1 ¼ inch bolt with 5/16 inch lock washer and 5/16 inch washer through the hole in the front bracket and thread in the C clamp.
Follow the same steps on the opposite side.
Make sure the bracket is held down tightly against the truck bed rail before tightening.
You are now ready to install your cover. With some assistance, lift the cover up and over the bed bringing the 4 bar hinges over the front brackets.
Set the cover down sliding the slots over the post on both sides.
Your cover should now be locked into place.
You are now ready to tighten the twist knobs on the 4 bar hinge into the front brackets.
Be sure to only hand tighten the twist knobs.
After doing this on both sides, lift up the cover and fasten the hydraulic struts into the ball studs on either side of the cover,
making sure that each hydraulic strut is securely fastened.
You have now successfully installed your UnderCover SE tonneau cover, complete with the weatherproof twist lock, a strong nylon pull strap and a bright battery powered LED light.
If you have questions or are interested in learning more about the UnderCover SE Tonneau Cover or any other aftermarket truck accessories,
just visit truckextras.com
or simply give us a call at 1-800-741-0130 and we’ll take care of you.