Tip:
Highlight text to annotate it
X
So now take the fabric that you've chosen to wrap your rings and you can just put a
little snip in the end, an inch or so wide, a little wider. You can actually rip fabric
and it'll come out, if as long as you go along the, along the grain it will rip nice and
straight. So just take it and again like you did, we did with the rubber you just give
a little tug, spiral around
and if your fabric is stretchy you'll have less wrinkles but... So again remember this
ring that has the fabric and that will have the rope knots is your top ring or your smaller
ring. So go ahead once you get all the way around you can just finish it up. I like to
put, finish it with, you can get a little bit of thread. Like right here we have some
from ripping it, there's some thread. You can just wrap it around and do a little knot
so that it's not as visible, you can use tape but the thread will be less visible and it
won't un-spiral, it won't uncoil because you'll have the, the knots on it eventually.