Tip:
Highlight text to annotate it
X
For the fish, I use the colors white, brown and Translucent White. I use four chalks
with different shades of brown and long hair brush. As tools I use the Clay
Machine, Dottingtool, a wire brush and a knife.
I mix the colors white and brown. You need a very light brown color. The other
shade of brown may not be quite as bright.
The two brown tones should look like this.
I create a gradient from the two shades of brown. Roll the Fimo out 20x.
At level 1.
The gradient should look like this. I roll out the Translucent White. At Level 9
I put the Translucent white on the brown gradient. I turn the Fimo and cut off the
edges.
I cut thin strips of the fish. About 2 millimeters thick.
The strips should look like this.
I peel off the strips. The strips must be set up. I put together the prepared strips.
The bright side is facing out.
I cut the fish. The unrolled Translucent White I cut and put in the middle of the
two halves of the fish.
The fish pattern should look evenly as this one.
I begradige the whites of fish using a Dottingtool.
I'm coloring the tasty fish fillet with chalk.
The bright colors are painted on the outside. Inside the dark chalk.
I give structure to the fish fillet with a wire brush.
I used the colors light green, leaf green, and yellow for the green asparagus. As
tools I used the Clay Machine, various green chalk, a knife, long hair brush and
Dottingtool.
A gradient is created from leaf green and light green. The leaf green is mixed with
the yellow.
I roll out the greens. At Level 1
I roll the gradient to an asparagus.
I cut off the beginning and end of the asparagus. The dark end I form an
asparagus tip.
I cut small leaves out the yellow and green color mix.
I put on the small pieces on the asparagus.
The asparagus should look like this.
With various green chalk I paint the asparagus.
You're done.