Tip:
Highlight text to annotate it
X
Hi again its Steve from www.mytoolkit.co.uk thanks for visiting and today I’m going
to show you a 15 gauge finish nailer, over to the bench and we can see the tool as you
can see here’s the tool in question comes with its own carrying case and its developed
manufactured by Tacwise as always I’ll give you the model number it can be searched on
our site and you can go direct to find technical information and course purchase online, and
the model number for this tool is GDA64V that’s GDA64V and this is a powerful angled 15 gauge
finish nail gun weight of the tool 1.4 kilograms and its nicely balanced in the hand, now It
takes 38mm through to 64mm two and half inch and there’s numerous uses for this. And
just to show you some of the features of the tool just bring it to the camera, rubber foot
stops bruising on soft woods, spring loaded quick release that can be pulled away any
jams quickly unclear bear in mind keep the tool disconnected from the airline, depth
adjuster like on many of our tools there’s a wheel there which adjust the length of the
safety arm and then conversely adjust depth of the penetration of the pin so it can be
wood filled later if you want it indented or you can have it flush with the surface.
And this is an angled brad 15 gauge angled, load that into the tool, place into the rear
here, slide it along, bring the feeder shoe over and were ready to go. Connect to the
airline, as you can see with this angled magazine as apposed to a straight magazine you can
get into some tight areas another feature of this type of tool. I’m using soft woods
here but again it could be hard woods etc. this particular pin 38mm inch and a half in
old money, and there we go firing the pin into the wood nice strong finish, now they
are just standing slightly proud on that but if I am to adjust it, and what I want to show
you here is the difference when we as you can see there below the surface probably 2
or 3mm below there as apposed to standing proud, but obviously you can adjust that with
different materials. Disconnect from the airline, numerous applications for this second fix
joinery, Boat Building of course Decking, Display, Shop fitting, Door Frames, Skirting,
Exhibition Contractors, Furniture, Cabinet Maker, Kitchens, Bedrooms, Panelling, Pine
Furniture, Sheds, Garden Buildings, Tongue and Groove, Wood Frames, Beading etc etc.
well there we go 15 gauge angled finish nailer see us on our site www.mytoolkit.co.uk see
you again soon and you take care by for now.