Tip:
Highlight text to annotate it
X
www.Gun-Fire.com
Hi.
Today, we'd like to present you a technical novelty,
which can bring a real revolution into airsoft.
What we have here is a typical, standard-type replica of a gun,
the CM041B.
What can be done with it?
OK, here's a short test of this gun's possibilities.
When using standard replicas, we may encounter certain problems
I'd like to tell you about right now.
Let's start with single-fire.
When shooting normally...
...all works fine.
Problems start, when we pull the trigger only half-way.
It doesn't always result with a shot.
In effect, the piston might only go half the way,
and the shot will fall on the second attempt.
When pulling the trigger rapidly two times,
it may also work not quite the way it should.
Another issue:
Auto fire.
All seems OK...
But you surely know this one.
Going single...
And shooting on semi.
What for? To loosen the spring and piston,
to prevent it from staying in the back position,
which would result in damaging the spring.
Sometimes you find it inconvenient, sometimes you might forget to do that...
Results? You know them - lost FPS, wasted money. Happens.
We'll show you how to get rid of all of these problems. Plus more.
Let's get on with it.
Welcome to the tech department.
Let me introduce you to the ASCU - or, Airsoft Smart Control Unit.
As I said, it's a rather innovative solution,
allowing us to make any v.2 gearbox AEG's work
similar to that of Systema PTW.
LET'S SEE HOW IT'S DONE...
STEP 1: Disassembling the gearbox.
STEP 2: Taking out the GB's internal parts.
STEP 3: Taking out the selector plate.
STEP 4: Modifying the selector plate according to the manual.
STEP 5: Mounting the sensor unit.
STEP 6: Assembling the gearbox.
STEP 7: Wiring the control unit.
STEP 8: Modifying the gearbox frame according to the manual.
STEP 9: Assembling the gearbox.
Mounting the ASCU, including the assembly and disassembly of the gearbox, took us about 50 minutes.
OK, so you've seen how a non-modified gun acts,
you've seen how it's to be modified...
Now let's see the effects.
First, the basics. Firing.
Semi.
Notice, how fast the trigger reacts.
There's no possibility for the BB not to go out once the trigger is pulled.
Auto.
Works normally.
And now for what's of most interest to us. Burst.
A short tap on the trigger when in full-auto...
...will always send 3 BBs one after another straight into your target.
V2 Gearbox compatible.
Monitors the gears and the battery.
Makes the trigger react faster.
Introduces the 'burst' option (3 shots on a single pull).
Prevents accidental double shots.
Reports of problems and malfunctions through emitting a sound and vibration, also cutting power off if needed.
Gives more options than Systema Revolution and PTW while keeping the costs much lower.
MORE ON WWW.GUNFIRE.PL