Tip:
Highlight text to annotate it
X
Hi everyone today I'm going to show you how to make a duct tape bow.
You will need scissors and some duct tape.If you would like you can glue your bow to a
headband.If so you will also need a headband and a glue gun.
The first step is to cut a piece of duct tape about 20 cm long and a smaller piece 1 cm
long.
Now fold the bigger piece in half but not completely leave about 1 cm of stickiness.
Fold the side of the duct tapee that does NOT have the bit of stickiness to the center.
Take the other side that DOES have stickiness and fold it to the middle so that the stickiness
is overlapping the other piece.Now you have a loop.
Pinch the middle of the loop and mold it till it is the shape that you desire.hold it in
place with your fingers.
Take the smaller piece of duct tape and wrap it around the middle of the bow so it secures
the shape of it.Now you have a bow!!!
If you would like it on a headband,take the headband and apply some glue from the glue
gun onto the headband where you would like the bow to be placed.
Be quick and place and secure the bow in place.
Now you have a cute and stylish headband!!!
plz SUBSCRIBE!!!!!