Tip:
Highlight text to annotate it
X
OK.. Here you have it and you can see... just put it on the handle of the wagtail.
Just snaps on like that... and you can ether pop rivet here first....or you can put a zip tie cable tie around it....to hold it
And heres a unger T-bar....an old one that I got.......same thing get it snaps on .....cable tie around...same thing holds it..makes it easier to use .
And take this one off........and here another ...squeegee handle that's for ..this is for the bigger channels .....as you can see snapes on....same thing cable tie around.
As you adjust it accordingly...and show you a clip just after this to show you how it actually works.
OK...Here it is... I'v put it on a wagtail handle as you can see...........with a zip tie cable tie.....as you can see it's at the back here.......so it it will not odstruct the hands when using it.
Just show you how I use it......just wet this glass down........I'v got it...........you can hold it like this........as you can see
Or if you wish.....because I know some people like to hold ether end like this...........so if you do it like that......and the good thing is that .........you get plenty of leverage....when you got longer channels.......And suppose THAT'S ABOUT IT!