Tip:
Highlight text to annotate it
X
Speaker: Hi it is Steve from PartSelect. Today we are going to show you how to change the
silverware basket on your dishwasher and it is a really easy job and you won’t need
any tools. Let me show you how we do it. Now to do this repair, we will start by opening
the dishwasher door and pull the lower rack out and remove the old cutlery basket and
you can reuse that as a container for some crafts or use it in your workshop.
Now if you cutlery basket came unassembled. We will show you how to put that together.
There are some keyhole slots in the side baskets that line up with the pins. So simply insert
them into the round holes and slide them so that they lock in place and the handle may
not be attached. We will note on the either end of the larger basket, there is a slotted
opening for that handle, so simply insert it and pull upwards on it. Make sure it locks
into place. The covers for two end baskets have two little pins that fit into little
hole on either end of that basket just to make sure they snap into place and hinge properly.
And you could just flex those enough to fit them down into the opening. And the cover
for the larger compartment is just a friction fit and snaps into place. Simply line it up in
the lower basket and engage the three tabs along the side on the top wire of the lower
rack and your repair is complete. I told you it was an easy job. Thanks for watching and
good luck with your repair.