Tip:
Highlight text to annotate it
X
Today on our 2013 Jeep Wrangler, well be test fitting the Convert-A-Ball Ball Mount Adapter
for Convert-A-Ball Weight Distribution Shank part number BA-1. Again, well be using this
with a Convert-A-Ball Weight Distribution Shank part number AMAC1.With the Weight Distribution
Shank already assembled on to our vehicle in the drop position, well secure the Ball
Mount platform in this lowest position with the pins and clips. With the Ball Mount platform
in its lowest position, we can measure from the ground to the top of the platform, getting
a measurement of about 12 and one quarter of an inch.We can out flip the Ball Mount
platform over into the rise and secure it at the very top of the Weight Distribution
Shank. We can then measure from the ground to the top of the ball platform getting a
measurement of about 20 and one quarter of an inch. Now, if your vehicles hitch height
matches our and your trailers ride height is on or in between these two measurements,
this would be an appropriate Ball Mount for you.That will complete todays test fit for
the Convert-A-Ball Ball Mount Adapter for a Convert-A-Ball Cushioned Weight Distribution
Shank part number BA-1 on our 2013 Jeep Wrangler. .